SPECIALIZED CONVEYOR DRYERS

 
FOR SCREEN PRINTING
High-speed curing of screen printed plastisol
inks, water-based inks and discharge
 

These Vastex dryers excel at curing all screen printed plastisol inks, water-based inks and discharge in low to high capacities, filling the requirements of beginning screen printers and high volume shops alike. Modular expandability of all floor standing dryers enables you to add heating chambers and conveyor belt sections to double, triple or quadruple belt speeds and

output. All Vastex heaters carry an industry-leading 15-year warranty, and feature closely spaced coils that provide high-density, medium-wavelength infrared heat for maximum cure speed without cold spots or under curing common with lesser designs. Precisely controlled belt speeds enable you to fine tune dwell time.

D1
Series

D-100 Infrared Conveyor Dryer

D-100

D-1000 Infrared Conveyor Dryer

D-1000

Entry level tabletop dryers with 18" (45.7 cm) wide belts (D-100) and 26" (66 cm) wide belts (D-1000) in 120 and 240V models offer capacities to 110 plastisol-printed garments/h and 50 garments/h screen printed with water-based ink. Adjustable heater height/angle, heat intensity, belt speed.

LittleRed
Series

LittleRed X1 Infrared Conveyor Dryer
LRX1

LittleRed X2 Infrared Conveyor Dryer
LRX2

LittleRed X3 Infrared Conveyor Dryer
LRX3

Mid- to high-capacity dryers with 30 or 54 in. (76 or 137 cm) wide belts. 120V/2,000 watt single-heater models up to 240V/15,600 watt three-heater models offer capacities from 90 to 720 plastisol-printed garments/h and 45 to 240/h screen printed with water-based ink.

EconoRed
Series

EconoRed II High production dryer
ECII

BigRedV
Series

BigRed V3 Infrared Dryer
BR3

Compact powerhouses in 30" and 54" (76 and 137 cm) belt widths. EconoRed II dryers cure up to 600 plastisol-printed gaments/h — 200/h screen printed with water-based ink. BigRed V3 dryers cure up to 950/h plastisol-printed garments/h — 432 screen printed with water-based ink.

FOR DTG & SCREEN PRINTING
High-speed curing of all digital inks, and all plastisol
and water-based screen printing inks and discharge
 

These Vastex dryers are specifically engineered to cure DTG-printed digital white ink, which is the most difficult due to its high water content, and can therefore also cure all types of screen printed inks and discharge at extremely high rates. Capacities can be doubled, tripled or quadrupled by adding heating chambers and belt extensions.

Little Red "D" models and the BigRedV4 feature a high-powered pre-heating zone that boosts ink temperatures past 300°F (149°C) within the first several inches (centimeters) of conveyor travel. This increases the dwell time that ink is exposed to optimum curing temperatures, allowing higher conveyor belt speeds.
 

LittleRedD
Series

LittleRed X1D infrared dryer
LRX1D

LittleRed X2D infrared dryer
LRX2D

Ultra compact and affordable DTG capable dryers with 18" (45.7 cm) wide belts (LRX1D) and 30" (76 cm) wide belts cure 27 to 52 garments/h DTG printed with digital white ink, 81 to 180/h screen printed with water based ink and 162 to 480/h printed with plastisol ink.

LittleRedD
Series

LittleRed X3-D Infrared Dryer
LRX3-D

These high-output dryers in 30", 54" and 78" (76, 137, and 198 cm) belt widths offer capacities from 61 to 185 DTG-printed garments/h, 185 to 555/h screen printed with water-based ink and 360 to 1080/h printed with plastisol ink. Ideal for mid- to high-volume DTG and screen printing shops.

BigRedV
Series

BigRed V4 54 inch Infrared Dryer
BR4

These are the most powerful industrial-grade dryers with four heaters per chamber in 30" and 54" (76 and 137 cm) belt widths, these robust machines can cure up to 144 garments/h printed with digital white ink, 432/h screen printed with water-based ink and 950/h screen printed with plastisol ink.

15 Year Heater Warranty