BigRed V3 Series dryers are performance machines with a single heating zone and three infrared heaters housed in a 54" long chamber. 54" (137 cm) wide models can cure over 950 shirts/hr* printed with plastisol ink, and 350/hr* printed with water-based ink or discharge. The 30" (76 cm) wide models can cure over 475 shirts/hr printed with plastisol ink and 175 shirts/hr with water-based ink or discharge.
All BigRed V3 dryers feature two independent air systems: a powered negative air exhaust which draws air down through the belt and removes moisture and fumes completely, and a "make-up air" system that filters lint and contaminates from air entering the heating chamber. Other features include digital temperature control, a cooling tray at exit, plus a "cool down mode" for powering down, and light tower to easily monitor dryer status.
475 - 950+ plastisol shirts/hr*
175 - 350+ water-based or discharge shirts/hr*
Temperature controller is accurate to +/-1 degree F.
Digital PID with Fuzzy logic is the most advanced in the industry
Hand crank raises or lowers all heating chambers simultaneously to within 2" - 7" (5 - 17.7 cm) of the belt for bulky items or hats
Unique cooling tray at the exit cools garments quickly as they leave the heating chamber
Digital belt speed voltmeter, a must have!
Make-up Air and Negative Exhaust Air, removes moisture and fumes fast
Filtered air intake provides clean curing air, no recycled fumes!
"X-Series" Conveyor Belt Tracking System
(max garment width)
30" (76 cm) or 54" (137 cm)
24" (61 cm) or 48" (122 cm)
Add heat chambers and belt extensions